击穿仪/电击穿试验仪/电压击穿试验仪

ZJC-20KV-200KV击穿仪/电击穿仪/电击穿试验仪/电压击穿试验仪/耐电压击穿试验仪/电压击穿强度试验仪/击穿强度试验仪/耐电压击穿强度试验仪/介电击穿强度试验仪/电气强度试验仪/介电强度试验仪

​

一、击穿仪/电击穿仪/电击穿试验仪/电压击穿试验仪/耐电压击穿试验仪/电压击穿强度试验仪/击穿强度试验仪/耐电压击穿强度试验仪/介电击穿强度试验仪/电气强度试验仪/介电强度试验仪满足标准：

1. Meet the standard:

满足GB1408.1-2006《绝缘材料电气强度试验方法，第1部分；工频下试验》 第2部分：对应用直流电压试验的附加要求》、GB/T1695-2005《 硫化橡胶工频击穿电压强度和耐电压的测定方法》、GB/T 3333-1999《电缆纸工频击穿电压试验方法》、HG/T 3330绝缘漆漆膜击穿强度测定法、GB/T 12656-1990《电容器纸工频击穿电压测定法》、GB/T1981及ASTM D149、ASTM D 3755标准要求设计制造。

To meet the GB1408.1-2006 "test method of electrical strength for insulation materials, first parts; test for power frequency" second parts: Additional requirements for the application of DC voltage test, GB/T1695-2005 "determination of voltage strength and voltage resistance of vulcanized rubber industrial frequency breakdown voltage", GB/T 3333-1999 "test method for power frequency breakdown voltage of cable paper" HG/T 3330 insulation paint film breakdown strength determination method, GB/T 12656-1990 "capacitor paper power frequency breakdown voltage measurement method", GB/T1981 and ASTM D149, ASTM D 3755 standard requirements for design and manufacture.

二、击穿仪/电击穿仪/电击穿试验仪/电压击穿试验仪/耐电压击穿试验仪/电压击穿强度试验仪/击穿强度试验仪/耐电压击穿强度试验仪/介电击穿强度试验仪/电气强度试验仪/介电强度试验仪适用材料：

Two. Applicable materials:

主要适用于固体绝缘材料如：电线套管、树脂和胶、浸渍纤维制品、云母及其制品、塑料薄膜、陶瓷、玻璃、绝缘漆、硫化橡胶、电缆纸、绝缘漆漆膜、硬质橡胶、纸板等绝缘介质在空气或液体介质中，测量工频（48~62Hz）或对应直流电压下击穿强度和耐电压时间。适用于连续均匀升压或逐级升压的方式，对试样施加交流/或直流，电压直至击穿，测量击穿电压值，计算试样的击穿强度；用迅速升压的方法，将电压升到规定值，保持一定的时间试样不击穿，定此时规定值为试样的耐电压值。

It is mainly applicable to solid insulating materials such as wire bushing, resin and glue, impregnated fiber products, mica and its products, plastic film, ceramic, glass, insulating varnish, vulcanized rubber, cable paper, insulating lacquer film, hard rubber, cardboard and so on in air or liquid medium, measuring 48~62Hz or pair in the air or liquid medium. Breakdown voltage and voltage withstand time under DC voltage. It is suitable for continuous uniform lift or step by step pressure, applying alternating / or DC, voltage until breakdown, measuring the breakdown voltage value, calculating the breakdown strength of the sample; using the method of rapid boost to raise the voltage to the specified value, keep the sample for a certain time not to break through, and determine the value of the sample's voltage resistance at this time. .

三、击穿仪/电击穿仪/电击穿试验仪/电压击穿试验仪/耐电压击穿试验仪/电压击穿强度试验仪/击穿强度试验仪/耐电压击穿强度试验仪/介电击穿强度试验仪/电气强度试验仪/介电强度试验仪基本功能：

Three. Basic functions:

由电脑控制，数据采集方式通过光电隔离，有效解决试验过程中的抗干扰问题，软件操作使用方便，能够实时显示动态曲线，同时升压速率无级可调，可以根据自己的需要进行升压速率调节，使升压速率真正做到匀速、准确，并能够准确测出漏电电流的数据。可实时绘制试验曲线，显示试验数据，判断准确，并可保存，分析，打印试验数据。并且能够自动判别试样击穿并采集击穿电压数据及泄露电流，同时能够在击穿的瞬间电压迅速降低自动归零。软件系统操作方便，性能稳定，安全可靠。

By computer control, the method of data acquisition through photoelectric isolation can effectively solve the problem of anti-interference in the test process. The software operation is easy to use and can display the dynamic curve in real time. At the same time, the rising pressure rate is stepless and adjustable. The boost rate can be adjusted according to its own needs, making the boost rate really uniform and accurate. And it can accurately measure the data of the leakage current. The experimental curve can be drawn in real time to show the accuracy of the test data, and to save, analyze and print test data. It can automatically judge the breakdown of the sample and collect the breakdown voltage data and leakage current, and at the same time, it can rapidly reduce the zero voltage automatically after breakdown. The software system is easy to operate, stable in performance, safe and reliable.

四、击穿仪/电击穿仪/电击穿试验仪/电压击穿试验仪/耐电压击穿试验仪/电压击穿强度试验仪/击穿强度试验仪/耐电压击穿强度试验仪/介电击穿强度试验仪/电气强度试验仪/介电强度试验仪结构特点：

Four. Structural characteristics:

采用立式箱体结构，极大的节省试验室内占地空间，地脚采用滑轮结构，方便移动和摆放，避免同类厂家生产的卧式设备，安放时需要另配安装台的情况，占地空间大，移动不方便等缺点。本产品采用直流伺服电机加载减速机构，保证了zuixin标准里面关于极慢速试验和极快速试验的zuixin要求，保证用户可以自由选择升压速率。

The use of vertical box structure greatly saves space in the laboratory. The foot uses pulley structure to facilitate the movement and placement of the horizontal equipment. It avoids the horizontal equipment produced by the same kind of manufacturers. It needs to be equipped with the installation of the platform, which has the disadvantages of large space, inconvenient movement and so on. This product uses a DC servo motor to load the deceleration mechanism, which ensures the latest requirements on the extreme speed test and the very fast test in the latest standard, so as to ensure that the user can choose the lift rate freely.

五、击穿仪/电击穿仪/电击穿试验仪/电压击穿试验仪/耐电压击穿试验仪/电压击穿强度试验仪/击穿强度试验仪/耐电压击穿强度试验仪/介电击穿强度试验仪/电气强度试验仪/介电强度试验仪主要技术要求：

Five. The main technical requirements:

1、设备输入电压： 220V (普通试验室电源均可兼容)；

1. Device input voltage: 220V (compatible with common laboratory power supply);

2、试验电压方式： 交流 0--50 KV；

2. Test voltage mode: AC 0--50 KV;

直流 0--50 KV；

DC 0--50 KV;

3、电器容量：5KVA；

3, electrical capacity: 5KVA;

4、试验方法：0-50KV全量程可调(采用高精度电压采样器件)；

4, test method: 0-50KV full range adjustable (using high-precision voltage samp领 device);

5、击穿及耐压试验升压速率：

5, breakdown and pressure test boost rate:

0.1 KV/S

0.1 KV/S

0.2 KV/S

0.2 KV/S

0.5 KV/S

0.5 KV/S

1.5 KV/S

1.5 KV/S

2 KV/S

2 KV/S

2.5 KV/S

2.5 KV/S

3.0 KV/S(此项满足zuixin标准里面极快速升压试验要求)；

3 KV/S (this meets the latest standard of very fast boost test requirements).

6、试验方式：

6. Test methods:

直流试验：1、匀速升压 2、阶梯升压 3、耐压试验

DC test: 1, constant speed boost 2, step 3 boost, withstand voltage test.

交流试验：1、匀速升压 2、阶梯升压 3、耐压试验

AC test: 1, uniform speed boost 2, step 3, withstand voltage test.

注：根据不同行业的标准，我们可以根据用户的要求，依据贵行业标准，为您定制行业标准所需的特殊测试功能。

Note: according to the standards of different industries, we can customize the special test functions required by the industry standard according to the requirements of your users according to your industry standard.

7、过电流保护装置应有足够灵敏度以保证试样击穿时在0.1S内切断电源。

7, overcurrent protection devices 首ld be sensitive enough to ensure that the power is cut off in the 0.1S when the sample is broken.

8、本仪器采用无触点原件匀速调压方式

8, the instrument adopts contactless original uniform speed regulation.

09、支持短时间内短路试验要求。

09, support short time short circuit test requirements.

10、电压测量误差： 1%。

10. Voltage measurement error: 1%.

11、试验电压连续可调：0-50 KV

11. The test voltage can be adjusted continuously: 0-50 KV

12、耐压时间设定：0-6小时(可通过软件连续设定)。

12, withstand time setting: 0-6 hours (can be set by software).

13、主机尺寸：约800mm*700mm*1300mm（长宽高）。

13, host size: about 800mm*700mm*1300mm (length width height).

14、主机重量：约100KG。

14. The weight of the host: about 100KG.

15、九级安全防护措施：

Level 15 and nine security protection measures:

(1) 超压保护

(1) overpressure protection

(2)试验过流保护

(2) test over current protection

(3)试验短路保护

(3) test short circuit protection

(4)安全门开启保护

(4) safety door opening protection

(5)软件误操作保护

(5) software misoperation protection

(6)零电压复位保护

(6) zero voltage reset protection

(7)试验结束放电保护

(7) the discharge protection at the end of the test

(8)独立保护接地

(8) independent protection of grounding

(9)试验完成后电磁放电

(9) electromagnetic discharge after experimental completion

六、击穿仪/电击穿仪/电击穿试验仪/电压击穿试验仪/耐电压击穿试验仪/电压击穿强度试验仪/击穿强度试验仪/耐电压击穿强度试验仪/介电击穿强度试验仪/电气强度试验仪/介电强度试验仪试验方式：

Six. Test methods:

1、绝缘试样空气中击穿、耐压试验或阶梯试验；

1. Breakdown test, pressure test or step test of insulating sample.

2、绝缘试样浸油中击穿、耐压试验或阶梯试验；

2. Breakdown test, pressure test or step test in insulating sample.

注：根据用户要求，可定制其他试验方式。

Note: according to user requirements, other test methods can be customized.

七、击穿仪/电击穿仪/电击穿试验仪/电压击穿试验仪/耐电压击穿试验仪/电压击穿强度试验仪/击穿强度试验仪/耐电压击穿强度试验仪/介电击穿强度试验仪/电气强度试验仪/介电强度试验仪试验软件：

Seven. Test software:

1、试验软件是我公司zuixin研发的功能强大、操作简单、显示直观的试验软件系统；

1, the test software is our company's latest research and development of powerful, simple operation, intuitive display test software system;

2、采用计算机控制通过人机对话方式，完成对绝缘介质工频电压击穿，工频耐压试验；

2. Through computer control, the power frequency voltage breakdown and power frequency withstand voltage test of insulation medium are completed through man-machine conversation.

3、本仪器在试验过程中可对升压击穿过程绘制实时曲线，每次试验的升压曲线都由不同颜色构成，试验结束后可叠加对比材料的试验数据重复性；

3. This instrument can draw a real time curve for the process of pressing and breakdown in the process of test. The rising curve of each test is made up of different colors. After the test, the repeatability of the test data of the contrast material can be superimposed.

4、可以随时调取当前及历史试验数据进行查看，编辑及修改参数；

4, you can get the current and historical test data at any time to view, edit and modify parameters.

5、试验过程中可以随时修改试验条件及存储路径及自动存储试验结果；

5, the test condition and storage path can be modified at any time and the results of automatic storage test can be modified at any time.

6、试验过程中，可随时通过软件决定本次试验是否有效，方便筛选试验结果；

6. During the testing process, software can be used to decide whether the test is effective and convenient for screening test results.

7、可设置操作口令，做到专机专人操作，避免无关人员误操作；

7, can set up the operation password, do special machine operation, avoid irrelevant personnel misoperation;

8、试验报告格式灵活可变，适用于不同用户的不同需求；

8, the test report format is flexible and changeable, which is suitable for different users' needs.

9、可对一组试验中曲线数据的有效与否进行人为选定；

9, it is possible to manually select the validity of curve data in a set of experiments.

10、试验结果数据可导入EXECL,WORD文档编辑；

10, the test results can be imported into EXECL and WORD documents.

11、过电流保护装置有足够的灵敏度，能够保证试样击穿时在0.1S内切断电源；

11. The overcurrent protection device has enough sensitivity to ensure that the power is cut off in the 0.1S when the sample is broken.

12、仪器运行的持久性: 仪器可连续运行使用，不需为保护仪器而定期停机；

12, the persistence of instrument operation: the instrument can be used continuously, without stopping regularly for the protection of instruments.

注：其它未尽事宜请联系我们，我们将竭诚为您服务。

Note: please contact us for other outstanding matters. We will serve you wholeheartedly.