用翻仪器的走远!Thetissueishomogenizedwithchloroform/methanol(2/1)toafinalvolume20timesthevolumeofthetissuesample(1gin20mlofsolventmixture).Afterdispersion,thewholemixtur... 用翻仪器的走远!
The tissue is homogenized with chloroform/methanol (2/1) to a final volume 20 times the volume of the tissue sample (1 g in 20 ml of solvent mixture). After dispersion, the whole mixture is agitated during 15-20 min in an orbital shaker at room temperature.
The homogenate is either filtrated (funnel with a folded filter paper) or centrifuged to recover the liquid phase.
The solvent is washed with 0.2 volume (4 ml for 20 ml) of water or better 0.9% NaCl solution. After vortexing some seconds, the mixture is centrifuged at low speed (2000 rpm) to separate the two phases. Remove the upper phase by siphoning and kept it to analyze gangliosides or small organic polar molecules. If necessary (need of removing labelled molecules...), rinse the interface one or two times with methanol/water (1/1) without mixing the whole preparation.
After centrifugation and siphoning of the upper phase, the lower chloroform phase containing lipids is evaporated under vacuum in a rotary evaporator or under a nitrogen stream if the volume is under 2-3 ml.
想制作一个支持UWB超宽带芯片(RTU7***)的电路,实现简单的接收发功能。 1。寻找一下RTU7300
我想用Z简单的材料配制蓄电池电解液 专用硫酸和蒸馏水按一定比例配制而成密度通常是1.24-1.30g/c
断路器是做什么的 都有什么具体规格 什么样的断路器放在什么样的地方 我真的对断路器一窍不通,谁可以用通俗易
用什么简单的小工具包粽子 diy粽子模具 裹粽器 这种强大的小玩意帮助你分分秒秒噶~~~~自己去买个哦
工控中组态不可以简单的理解为:把电脑通过软件变成触摸屏使用只考虑基本功能的话 用PLC和触摸屏做一个设备的
网上查的感觉好麻烦,有简单的么?有的话把配方以及具体制作过程告诉我 双氧水、乙醇、烧碱可以发出微弱红光荧
我想用一个加速度传感器进行加速度的测量,传感器的电压信号如何做简单的RC硬件滤波呢?我采样频率500HZ,
刚学Hibernate,写了个简单的测试类,运行到SessionFactory sf = configra
用fpga做一个简单的扫频仪用到什么知识啊?问一下有什么具体的步骤啊,先做什么在做什么? 首先选择一块开
Z简单的Java程序代码,试了很多次还是错的,懂得大神帮忙看看 你的Java程序代码没有错误,但是在