泊睿BR-PV-THD热循环-湿热-湿冻试验箱

★技术参数
☆温度范围：
A型：-20℃～+100℃（+150℃）
B型：-40℃～+100℃（+150℃）
C型：-60℃～+100℃（+150℃）
D型：-70℃～+100℃（+150℃）
☆温度波动度：±0.5℃
☆温度均匀度：±2.0℃
☆湿度范围：30%～98%R.H
☆湿度误差：+2/-3%R.H

★型号及工作室尺寸(D×W×H)(mm)
GDJ-100400×450×550
GDJ-150500×500×600
GDJ-225500×600×750
GDJ-400600×800×850
GDJ-800800×1000×1000
GDJ-10001000×1000×1000
GDJ-15001500×1000×1000

BR-PV-THD Thermal Cyc领, Humidity-Freeze, Damp-Heat Tester



Thermal Cyc领 Test
Implementation of standards: IEC 61215:2005 & Ed.3, IEC 61646:2008 “TC200 thermal cyc领 test, TC50 thermal cyc领 test”, and UL 1703-2008 “temperature cyc领 test”.
1. IEC 61215 Ed.3, IEC 61646:2008 test condition:
The temperature of modules between -40°C±2°C and +85°C±2°C cyc领, the rate of change of temperature between the low and high extremes shall not exceed 100°C/h and the module temperature shall remain stable at each extreme for a period of at least 10 min. The cycle time shall not exceed 6h.
2. UL 1703-2008 test condition:
The temperature of modules between -40°C±2°C and +90°C±2°C cyc领, the instantaneous rate of temperature change of the test chamber with respect to time is not to be greater than 120°C/h.

Humidity-Freeze Test
Implementation of standards:
IEC 61215 Ed.3, IEC 61646:2008 “humidity-freeze”, UL 1703-2008 “humidity test”
The temperature of modules between -40°C±2°C and +85°C±2°C cyc领.
Relative humidity 85%RH±5% at 85°C in IEC 61215 and 61646, but UL 1703 Control in 85%RH±2.5% at 85°C, allowable deviation range different.

Damp-Heat Test
Implementation of standards: IEC 61215:2005 & Ed.3, IEC 61646:2008 “damp-heat test”
Test temperature 85°C ± 2°C, Relative humidity 85% ± 5%, Test duration 1000h

Electrical continuity, Insulation continuity, Grounding continuity test system:
Implementation of standards: IEC 61215:2005 & Ed.3, IEC 61646:2008 “electrical continuity for TC200 thermal cyc领 test and humidity-freeze test” condition, and UL 1703-2008 “Insulation continuity and grounding continuity” condition.
DC power current / voltage output: ≥10A / 50V