- 可恶!知识不受控制的进入了我的大脑!
- Dr.赛流式小课堂 | 轻松上手流式染色细胞因子实验
- 小道快讯 | 交付中心技能PK大赛奖项花落谁家
- MP工具箱 | 云学堂:一键开启免费学习平台
- 媒体报道丨国产仪器如何跑赢存量市场?
- 东隆科技诚邀您共赴CIOE 2024深圳光博会,见证光电技术革新!
- 滨松:行“专业公司”应行之事
- 参会指南 | 第一届微纳塑料检测及其标准化学术研讨会
- 8月节日 | 为猫咪、狗狗和流浪动物送上专属礼物
- 实验室磷酸根分析仪有效检测磷酸根含量高低
- Aiculture|探索微生物世界:平板计数琼脂的实用指南
- 火力发电|教科书里的奥立龙在线钠表
- 啤酒色度仪如何检测啤酒色度值?
![上海长方光学仪器有限公司](http://yiqi-oss.oss-cn-hangzhou.aliyuncs.com/aliyun/Manage/2018-07-06/20180706-2055212137.jpg)
- 来源:内容来源于网络 浏览量:111次
- 【导读】 1Human High Mobility Groupprotein B1(HMGB-1)ELISA Kit(96 T) This immunoassay kit allows f
1
Human High Mobility Group
protein B1(HMGB-1)ELISA Kit
(96 T)
This immunoassay kit allows for the in vitro quantitative determination of human
HMGB-1 concentrations in serum, plasma.
Expiration date six months from the date of manufacture
FOR RESEARCH USE ONLY. NOT FOR USE IN DIAGNOSTIC PROCEDURES.
2
PRINCIPLE OF THE ASSAY
The microtiter plate provided in this kit has been pre-coated with
an antibody specific to HMGB-1. Standards or samples are then
added to the appropriate microtiter plate wells with a
biotin-conjugated antibody preparation specific for HMGB-1 and
Avidin conjugated to Horseradish Peroxidase (HRP) is added to
each microplate well and incubated. Then a TMB (3,3',5,5'
tetramethyl-benzidine) substrate solution is added to each well.
Only those wells that contain HMGB-1, biotin-conjugated
antibody and enzyme-conjugated Avidin will exhibit a change in
color. The enzyme-substrate reaction is terminated by the
addition of a sulphuric acid solution and the color change is
measured spectrophotometrically at a wavelength of 450 nm ± 2
nm. The concentration of HMGB-1 in the samples is then
determined by comparing the O.D. of the samples to the
standard curve.
DETECTION RANGE
78 pg/ml-5000 pg/ml. The standard curve concentrations used
for the ELISA’s were 5000 pg/ml, 2500 pg/ml, 1250 pg/ml,
625pg/ml, 312 pg/ml, 156 pg/ml, 78 pg/ml.
3
SPECIFICITY
This assay recognizes human HMGB-1. No significant
cross-reactivity or interference was observed.
SENSITIVITY
The minimum detectable dose of human HMGB-1 is typically
less than 20 pg/ml.
The sensitivity of this assay, or Lower Limit of Detection (LLD)
was defined as the lowest protein concentration that could be
differentiated from zero.
MATERIALS PROVIDED
Reagent Quantity
Assay plate 1
Standard 2
Sample Diluent 1 x 20 ml
Biotin-antibody Diluent 1 x 10 ml
HRP-avidin Diluent 1 x 10 ml
Biotin-antibody 1 x 120μl
HRP-avidin 1 x 120μl
Wash Buffer
1 x 20 ml
(25×concentrate)
TMB Substrate 1 x 10 ml
Stop Solution 1 x 10 ml
4
STORAGE
1. Unopened test kits should be stored at 2-8C upon receipt
and the microtiter plate should be kept in a sealed bag. The
test kit may be used throughout the expiration date of the kit,
provided it is stored as prescribed above. Refer to the
package label for the expiration date.
2. Opened test plate should be stored at 2-8C in the aluminum
foil bag with desiccants to minimize exposure to damp air. The
kits will remain stable until the expiring date shown, provided it
is stored as prescribed above.
3. A microtiter plate reader with a bandwidth of 10 nm or less
and an optical density range of 0-3 OD or greater at 450nm
wavelength is acceptable for use in absorbance
measurement.
REAGENT PREPARATION
Bring all reagents to room temperature before use.
1. Wash Buffer If crystals have formed in the concentrate,
warm up to room temperature and mix gently until the
crystals have completely dissolved. Dilute 20 ml of Wash
Buffer Concentrate into deionized or distilled water to prepare
500 ml of Wash Buffer.
5
2. Standard Centrifuge the standard vial at 6000-10000rpm
for 30s. Reconstitute the Standard with 1.0 ml of Sample
Diluent. This reconstitution produces a stock solution of
5000pg/ml. Allow the standard to sit for a minimum of 15
minutes with gentle agitation prior to making serial dilutions.
The undiluted standard serves as the high standard
(5000pg/ml). The Sample Diluent serves as the zero
standard (0 pg/ml). Prepare fresh for each assay. Use within
4 hours and discard after use.
3. Biotin-antibody Centrifuge the vial before opening. Dilute
to the working concentration using Biotin-antibody
Diluent(1:100), respectively.
4. HRP-avidin Centrifuge the vial before opening. Dilute to the
working concentration using HRP-avidin Diluent(1:100),
respectively.
Precaution: The Stop Solution provided with this kit is an acid solution. Wear
eye, hand, face, and clothing protection when using this material.
OTHER SUPPLIES REQUIRED
Microplate reader capable of measuring absorbance at 450
nm, with the correction wavelength set at 540 nm or 570 nm.
6
Pipettes and pipette tips.
Deionized or distilled water.
Squirt bottle, manifold dispenser, or automated microplate
washer.
An incubator which can provide stable incubation conditions
up to 37°C±0.5°C.
SAMPLE COLLECTION AND STORAGE
Serum Use a serum separator tube (SST) and allow
samples to clot for 30 minutes before centrifugation for 15
minutes at 1000 g. Remove serum and assay immediately or
aliquot and store samples at -20°C. Centrifuge the sample
again after thawing before the assay. Avoid repeated
freeze-thaw cycles.
Plasma Collect plasma using citrate, EDTA, or heparin as
an anticoagulant. Centrifuge for 15 minutes at 1000 g within
30 minutes of collection. Assay immediately or aliquot and
store samples at -20°C. Centrifuge the sample again after
thawing before the assay. Avoid repeated freeze-thaw cycles.
Note: Grossly hemolyzed samples are not suitable for use in this assay.
7
ASSAY PROCEDURE
Bring all reagents and samples to room temperature before use. It is
recommended that all samples, standards, and controls be assayed in duplicate.
All the reagents should be added directly to the liquid level in the well. The
pipette should avoid contacting the inner wall of the well.
1. Add 100μl of Standard, Blank, or Sample per well. Cover with
the adhesive strip. Incubate for 2 hours at 37°C.
2. Remove the liquid of each well, don’t wash.
3. Add 100μl of Biotin-antibody working solution to each well.
Incubate for 1 hour at 37°C. Biotin-antibody working
solution may appear cloudy. Warm up to room temperature
and mix gently until solution appears uniform.
4. Aspirate each well and wash, repeating the process three
times for a total of three washes. Wash: Fill each well with
Wash Buffer (200μl) and let it stand for 2 minutes, then
remove the liquid by flicking the plate over a sink. The
remaining drops are removed by patting the plate on a paper
towel. Complete removal of liquid at each step is essential to
good performance.
8
5. Add 100μl of HRP-avidin working solution to each well.
Cover the microtiter plate with a new adhesive strip. Incubate
for 1 hour at 37°C.
6. Repeat the aspiration and wash five times as step 4.
7. Add 90μl of TMB Substrate to each well. Incubate for 10-30
minutes at 37°C. Keeping the plate away from drafts and
other temperature fluctuations in the dark.
8. Add 50μl of Stop Solution to each well when the first four
wells containing the highest concentration of standards
develop obvious blue color. If color change does not appear
uniform, gently tap the plate to ensure thorough mixing.
9. Determine the optical density of each well within 30 minutes,
using a microplate reader set to 450 nm.
CALCULATION OF RESULTS
Using the professional soft "Curve Exert 1.3" to make a standard curve is
recommended, which can be downloaded from our web.
Average the duplicate readings for each standard, control, and
sample and subtract the average zero standard optical density.
Create a standard curve by reducing the data using computer
software capable of generating a four parameter logistic (4-PL)
9
curve-fit. As an alternative, construct a standard curve by plotting
the mean absorbance for each standard on the x-axis against
the concentration on the y-axis and draw a best fit curve through
the points on the graph. The data may be linearized by plotting
the log of the HMGB-1 concentrations versus the log of the O.D.
and the best fit line can be determined by regression analysis.
This procedure will produce an adequate but less precise fit of
the data. If samples have been diluted, the concentration read
from the standard curve must be multiplied by the dilution factor.
LIMITATIONS OF THE PROCEDURE
The kit should not be used beyond the expiration date on the
kit label.
Do not mix or substitute reagents with those from other lots or
sources.
It is important that the Standard Diluent selected for the
standard curve be consistent with the samples being
assayed.
If samples generate values higher than the highest standard,
dilute the samples with the appropriate Standard Diluent and
repeat the assay.
1 0
Any variation in Standard Diluent, operator, pipetting
technique, washing technique, incubation time or
temperature, and kit age can cause variation in binding.
This assay is designed to eliminate interference by soluble
receptors, binding proteins, and other factors present in
biological samples. Until all factors have been tested in the
Immunoassay, the possibility of interference cannot be
excluded.
TECHNICAL HINTS
Centrifuge vials before opening to collect contents.
When mixing or reconstituting protein solutions, always avoid
foaming.
To avoid cross-contamination, change pipette tips between
additions of each standard level, between sample additions,
and between reagent additions. Also, use separate reservoirs
for each reagent.
When using an automated plate washer, adding a 30 second
soak period following the addition of wash buffer, and/or
rotating the plate 180 degrees between wash steps may
improve assay precision.
1 1
To ensure accurate results, proper adhesion of plate sealers
during incubation steps is necessary.
Substrate Solution should remain colorless or light blue until
added to the plate. Keep Substrate Solution protected from
light. Substrate Solution should change from colorless or light
blue to gradations of blue.
Stop Solution should be added to the plate in the same order
as the Substrate Solution. The color developed in the wells
will turn from blue to yellow upon addition of the Stop Solution.
Wells that are green in color indicate that the Stop Solution
has not mixed thoroughly with the Substrate Solution.厦门慧嘉生物长期专业销售ELISA试剂盒\AssayBiotech\Santa \BD\Immunoway\ Abcam \ Cst \ jackson \ Pierce \ Sigma \ Amresco \Qiagen \ Cayman \ abnova \ millipore \ invitrogen \ merk \ ebioscience \prospec \ peprotech细胞因子特价。等生物试剂产品。实验为大,诚信经营,为客户提供“*高质量的产品”和“***的服务”电话:18906011628 0592-6020891QQ: 1193953234 1048735792登陆 http://www.biohj.com (向客服人员索取原版说明书)。欢迎广大老师来询!仪器网-专业分析仪器服务平台,实验室仪器设备交易网,仪器行业专业网络宣传媒体。
相关热词:
金相分析仪,油品分析仪,针焰试验仪,液位传感器,土壤测试仪,高效液相色谱仪价格,霉菌试验箱,跌落试验台,离子色谱仪价格,噪声计,集菌仪,接地电阻测试仪型号,柱温箱,旋涡混合仪,电热套,场强仪万能材料试验机价格,洗瓶机,匀浆机,耐候试验箱,熔融指数仪,透射电子显微镜。
- 2006-07-25 08:49:31
- 标签:
- 收藏(0) 赞(0) 踩(0)
-
随时了解更多仪器资讯,求购、招标、中标信息实时更新,厂商招商信息随时看。大量、齐全、专业的仪器信息尽在仪器网(yiqi.com)。扫一扫关注仪器网官方微信,随时随地查看仪器用户采购、招标需求!
-
Elisa试剂盒操作:羊乳清蛋白(LA)elisa试剂盒2004-07-16 10:28:52
Elisa试剂盒操作:羊乳清蛋白(LA)elisa试剂盒本试剂盒仅供研究使用。实验原理本试剂盒应用
-
(HSPG2)elisa检测,硫酸乙酰肝素蛋白多糖2试剂盒2005-02-24 09:23:06
(HSPG2)elisa检测,硫酸乙酰肝素蛋白多糖2试剂盒免费代测上海科顺生物所有的elisa试剂盒提供免费
-
(MAPK)elisa检测,丝裂原激活的蛋白激酶/MAP激酶试剂盒2005-02-24 09:23:06
(MAPK)elisa检测,丝裂原激活的蛋白激酶/MAP激酶试剂盒规格:96T/48T货号:KS16621品
-
人高迁移率族蛋白B1(HMG-B1)酶联免疫分析试剂盒使用说明书2004-07-13 09:31:27
人高迁移率族蛋白B1(HMG-B1)酶联免疫分析试剂盒使用说明书本试剂盒仅供研究使用。检测范围:
-
人高迁移率族蛋白B1(HMGB-1)elisa试剂盒使用说明2004-07-16 10:28:50
人高迁移率族蛋白B1(HMGB-1)elisa试剂盒使用说明本试剂盒仅供研究使用。实验原理本试剂盒
-
大鼠高迁移率族蛋白B1(英文简写:HMGB-1)原装ELIS2004-09-28 09:23:07
大鼠高迁移率族蛋白B1(英文简写:HMGB-1)原装ELISA试剂盒选择北京方程生物公司大鼠高迁移率族蛋白B
-
猪高迁移率族蛋白B1(HMGB-1)ELISA试剂盒说明书2004-11-09 09:23:08
猪高迁移率族蛋白B1(HMGB-1)酶联免疫分析试剂盒使用说明书本试剂仅供研究使用目的:本试剂盒用于测定猪血
-
小鼠高迁移率族蛋白B1(HMGB1)ELISA2004-11-14 09:23:04
本试剂盒只能用于科学研究,不得用于医学诊断检测试剂盒使用说明书检测原理试剂盒采用双抗体一步夹心法酶联免疫吸附
-
小鼠高迁移率族蛋白B1(HMGB1)2004-11-14 09:23:05
本试剂盒只能用于科学研究,不得用于医学诊断小鼠高迁移率族蛋白B1(HMGB1)ELISA检测试剂盒使用说明书
-
大鼠(Rat)高迁移率族蛋白B1(HMGB-1) ELISA检测试剂盒2004-11-14 09:23:05
本试剂盒只能用于科学研究,不得用于医学诊断大鼠(Rat)高迁移率族蛋白B1(HMGB-1)ELISA检测试剂
人高迁移率族蛋白B1(HMGB-1)ELISA Kit
-
您可能感兴趣
![](https://static.yiqi.com/Pingce/img/imgddd.png)
①本文由仪器网入驻的作者或注册的会员撰写并发布,观点仅代表作者本人,不代表仪器网立场。若内容侵犯到您的合法权益,请及时告诉,我们立即通知作者,并马上删除。
②凡本网注明"来源:仪器网"的所有作品,版权均属于仪器网,转载时须经本网同意,并请注明仪器网(www.yiqi.com)。
③本网转载并注明来源的作品,目的在于传递更多信息,并不代表本网赞同其观点或证实其内容的真实性,不承担此类作品侵权行为的直接责任及连带责任。其他媒体、网站或个人从本网转载时,必须保留本网注明的作品来源,并自负版权等法律责任。
④若本站内容侵犯到您的合法权益,请及时告诉,我们马上修改或删除。邮箱:hezou_yiqi